Dremel Go – Going Places a Cordless Screwdriver Hasn’t Been Before

As an Amazon Associate we earn from qualifying purchases (more).

feature

What's This?This post is sponsored by The Home Depot. We grew a lot of pie pumpkins this past year. They’re different from the more traditional pumpkins people associate with Halloween. They’re smaller, but denser, a lot more content and not so hollow. My wife has been baking extensively with them all fall, pumpkin muffins, pumpkin bread, pumpkin pie, even pumpkin cookies. Then, for Thanksgiving dessert she made a pumpkin chocolate cheesecake. I had never heard of such a thing, and had no idea how badly I needed it until I tried it. It’s pretty much the same story with the new Dremel Go, a battery powered screw driver that I had never heard of, but now that I’ve used it, I need it.

This little device promises to replace the 4 way screwdriver we keep in the utility drawer, the one that gets the bulk of the work around the house. Though slightly bulkier than a standard screwdriver, the Dremel Go is still pretty svelte, especially considering how powerful this thing is. This is the key to the success of this tool, it easily fits where impact drivers or drills struggle to go.

dremel go set
The Dremel Go comes with a charger and a bit set containing 7 of the most popular 1/4″ drive bit sizes

The Zen of Dremel Go

At the heart of the Dremel Go is a 4v rechargeable Lithium battery that powers the unit. Recharging takes place with the included USB cord and 110v wall charger, though it can be recharged in any USB port. There is am LED light to indicate the battery charge level. For such a small device it generates a handful of adjustable torque, six settings in fact, guaranteeing you will find the right setting for your particular application.

dremel go adjust
The dial allows for quick adjustment of the torque applied by the Dremel Go, making it easy to find the right level for the job at hand.

There is a 3 position switch, forward, reverse and the center position, which locks the head and allows the Go to be used as a manual screwdriver. More on that later. Engagement is achieved by pushing the screwdriver against the item being driven and then turns at 360 RPM, which is surprisingly fast. The Dremel Go utilizes a ¼’ drive for the bit and includes 7 of the most popular size and drive types. Additionally, any ¼” drive bit will fit into the driver. Here are the specs from Dremel:

switch
The three position switch controls the direction of the drive, foward, reverse and a static position allowing the Go to be used as a manual screwdriver. The rubberized body assures a comfortable and secure grip.

Dremel Go Specifications

• 4V MAX Cordless Screwdriver with USB Charger, “overdrive” Protection, Twice the Torque of Similar Competitive Products, Reversible, Starts with a Simple Push
• Rechargeable integrated battery- USB charging system
• Push Activation- press into screw to activate
• Variable torque setting- prevents stripping screws
• Superior torque – 360 RPM to drive screws 2X faster than comparable products in the market
• Reverse power mode – to drive and remove screws
• Magnetic holder – for easy bit change
• Includes the 7 most common ¼ HEX screwdriver bits
• Chuck Size: 1/4 in
• Length: 9.5″
• Width: 1.8″

indicator
The LED display clearly indicates the battery level on the Dremel Go.

Out and About With the Dremel Go

My work bench out in the shop is a mess of various chargers for the assorted battery powered tools that have accumulated over the years. All of them are slotted to accept a screw head for mounting purposes, so I thought that would be an interesting application for the Dremel Go. I grabbed a scrap piece of 1×8 I had kicking around and an assortment of screws from the catch all bin where orphan fasteners end up. I measured up the numerous chargers and the mounting points and laid it out on the board. Then I sorted through the disparate screw assortment and turned the Dremel Go loose on them.

halfway
I tried a number of different torque settings before finding the right one, but after the initial learning curve it was easy to set the tool up for the desired depth.

I started with the lowest torque setting and the driver stalled out pretty quickly. I dialed up the torque to 2 and got deeper, but not the desired depth. Once I hit 3 on the torque setting the driver took the screw right about flush. The rubberized grip was comfortable in my hand and provided a firm controlled grip. The reverse feature is handy and allows for easy extraction of fasteners. If you are looking for a precise depth as I was in this application it is best to get close to the depth you want under power, then place the switch in the center position to lock the head and make the final adjustment manually.

Let’s Take This Outside

ideal
The size, power and weight of the Dremel Go make this an ideal tool for a variety of jobs inside or out. I was able to carry this tool in my pocket out to the sheep barn for a couple of small jobs.

I wanted to try the Dremel Go in a variety of applications, and I had a few odds and ends type chores out near the sheep barn. I needed to hang a net near the water tank to scoop debris out. I drove a screw in to the desired depth quite easily. I then had to drive a few screws into a plywood panel on the back of an auxiliary shelter we had build for the ram. The panel was to close up the back to prevent wind and snow from entering the shed. One of the really nice features of this tool was the ability to extend my finger to secure the screw to the bit and the work surface with the hand I was holding the screwdriver to allow for accurate and easy placement. Try that with a drill/driver.

closing
The second job up at the sheep barn, closing up the back of the ram shed.

One improvement I would like to see on this tool is a locking collar for the bit. There is a magnet that secures the bit, and it works well enough, I never lost a bit, but there were times when the bit would lodge in a Phillips screw head and pull out of the driver. It also prevents you from using the driver as a drill, as the bit lodges in whatever you are drilling and has to be manually pulled out. A minor thing, but the driver certainly generates sufficient torque for drilling, so this would improve the overall utility of the tool.

utility
The Dremel Go has plenty of power to handle drilling duties, a locking collar would increase the overall utility of the tool.

Back Inside with the Dremel Go

I had been procrastinating completing a job in my wife’s sewing area for quite some time. It was a small task, just mounting a plant hanger for her. The trouble though is that it’s a bit of a pain, the way the hanger is constructed precludes the use of my impact driver, but the Dremel Go showed up and I was spared the indignity of manually driving screws. The Go again demonstrated its utility by fitting in the bracket and making short work of the task. The Go is quite light and easy to handle, certainly easier to manipulate than most drills or impact drivers due to its small size and sub 1 pound weight.

fits
The Dremel Go fits where larger drivers cannot go.

Final Thoughts

The Dremel Go is what I consider to be a niche tool, but it fits its niche well. It doesn’t pretend to be an impact driver or heavy duty drill. However, for most applications where a screwdriver is the right tool, the Dremel Go is a great choice. It fits in where bigger heavier tools can’t, yet generates enough power to accomplish all but the most demanding fastener driving jobs. It fits nicely in our in house tool drawer and has plenty of capacity between recharging to perform multiple tasks. The Dremel Go is available at the Home Depot for a very reasonable $36.

Buy Now - via Home Depot

I acknowledge that The Home Depot is partnering with Home Fixated in sponsored content. As a part of the sponsorship, Home Fixated is receiving compensation for the purpose of promoting The Home Depot. All expressed opinions and experiences are our own words. This post complies with the Word Of Mouth Marketing Association (WOMMA) Ethics Code and applicable Federal Trade Commission guidelines.

Photo of author

About Stephen

Stephen hails from a family of DIY’ers, the delusion that no job is too big or complex to tackle on your own originally instilled by his father and further reinforced by his brothers, who are equally afflicted. His first real project was the complete restoration of an old farmhouse in Upstate NY, which was followed by another, setting the pattern. After 40 years in the wine and spirits business (sounds far more glamorous than the reality) he recently retired to an 80 acre sheep farm, where he will continue to farm until his retirement savings are exhausted. As a co-owner of 30 something bicycles (a devotee of the N+ 1 theory of bicycle requirements, where N= the current number owned), he is typically found tinkering on his latest build or out testing said results. Stephen spends his spare time (face it, all of his time) drinking good coffee, currying homegrown produce or fixing whatever is currently non-operational. He also spends whatever time he can with an ever growing extended family. When his wife retired they planned to do as much cycle touring as their legs will allow, but the sheep are pretty demanding.

Subscribe to our newsletter

Get access to free prizes, product sneak-peeks, reviews, how-to's and much more!

More Info | Email Privacy

1 thought on “Dremel Go – Going Places a Cordless Screwdriver Hasn’t Been Before”

  1. I appreciate the review, but cordless screwdrivers have been around for decades. One thing I like about my old skil model is it lets you lock the chuck and has a substantial grip shape so if it doesn’t have enough torque to get the job done, or the battery is depleted, you can also use it as a manual screwdriver.

    Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.