Ego Cordless Chainsaw – Be A Gas-Free Lumberjack

As an Amazon Associate we earn from qualifying purchases (more).

Is your yard starting to look like the Forbidden Forest? Time to get rid of the deadwood (and I’m not necessarily talking about your son-in-law here)? If you have trees on your property, from time to time they’re going to need a trim job. At some point, they’re leafy lifespan will come to an end, and some Paul Bunyan type will have to bring ‘em down. If that Paul Bunyan wannabe is YOU, you should take a look at the new EGO 56V Chainsaw. One arrived at HomeFixated HQ recently for our evaluation; belly up to the (14”) bar and see how it performed!

ego 56v chainsaw
A box full of EGO…

According to the folks at EGO, the EGO 56V Chainsaw is the most powerful rechargeable product of its kind. The first-ever 56-Volt lithium-ion battery has 40 percent more power than the leading 40-Volt battery. It is removable and fits all EGO tools. The saw delivers the performance of gas without the noise, fuss and fumes. Much like our very favorable experience with the EGO Blower and Mower. Here are the official specs on the chainsaw:

• 2.0 Ah 56-Volt Lithium-Ion Battery (a 4.0 Ah battery is also available)
• High-Efficiency Brushless Motor: Lightweight compact design delivers longer run time, low vibrations and extended motor life
• 14” Oregon bar and chain provides superior cutting performance
• 6,300 RPM’s for clean, fast cuts
• Up to 100 cuts per charge (on 4×4 nominal lumber)
• 30-Minute Charge Time lets you get back to work faster
• Automatic lubrication system
• Chain kickback brake for added safety and control
• Chain tensioning knob
• Oil inspection window
• Automatic lubrication system
• 5 year limited warranty

Here’s a promo video from EGO with an overview of their 56V lineup:

http://youtu.be/COisfmmyPg8

Put That EGO To Work

We have a small farm, with a few acres of woods. I’ve only used gas-powered chainsaws in the past, mostly my Husqvarna and my Echo Timber Wolf. I didn’t quite know what to expect from a battery-powered saw; I knew it probably wouldn’t be as powerful as a gas model, but wondered if it would have enough power for anything other than light trimming. My daughter and son-in-law’s yard had some trees that were way overdue for a trim, and a peach tree that needed to come down, so I packed up the EGO 56V Chainsaw and my flannel lumberjack shirt and hit the road. (Unfortunately, it was too warm to wear the flannel, sorry).

ego 56v chainsaw
No, it hasn’t been trimmed lately; how could you tell?

I unpacked the EGO 56V chainsaw, and threw the battery on the charger. It’s a whopper of a battery, all those volts need some room, I guess. While the battery was charging, I put the saw together. It’s a pretty straightforward process; all that’s required is to install the bar and chain, and add some oil. By the way, bar and chain oil doesn’t come with the saw, so pick up a bottle when you get the saw.

ego 56v chainsaw
It takes a big battery to harness those 56 volts…

The bar and chain go on easily, and no tools are required. If you’ve ever installed a chain on a chainsaw before, it’s pretty much the same process. First, unscrew the large knob on the side cover, and remove the cover. Straighten out the chain, hold the bar upright, and drape the chain over it so it sits in the bar’s groove. Make sure the cutting edges of the teeth are facing in the right direction: forward as they sit on top of the bar. There are actually tiny directional arrows engraved into the chain; if your eyes are better than mine (not a high bar), you might even be able to see them!

ego 56v chainsaw
To install the bar and chain, loosen the big knob…
ego 56v chainsaw
Remove the side cover
ego 56v chainsaw
And drape the chain over the bar

Turn the tension-adjusting knob all the way in, and place the bar onto the saw. Make sure the tension adjuster pin gets inserted into the lower hole in the tail of the bar. Replace the side cover and lightly tighten the side cover knob by turning it clockwise. Lift the tip of the bar, and tighten the tension adjuster until there is no sag in the chain, but it will still rotate without binding. Tighten the side cover, and you’re fully assembled, except for a little oil.

ego 56v chainsaw
Back the tension adjuster all the way off
ego 56v chainsaw
Install the bar, being sure the adjuster pin is engaged
ego 56v chainsaw
Replace the cover, and tighten the knob partially
ego 56v chainsaw
Adjust the tension, lift the bar nose, and tighten the cover down

Although the EGO 56V Chainsaw doesn’t require you to mess around mixing gas and oil to power it, it does need oil to lubricate the bar and chain, just like any other chainsaw. A chain spinning at 6,300 RPM is going to generate a lot of friction, which means heat, so it definitely needs lubrication. Just spin off the cap, pour in some bar and chain oil (slowly, as there is a filter in the tank, to keep out debris), and close it back up. There’s a little translucent window on the side, where you can check the oil level. It’s a good idea to do so every so often, assuming you don’t want to see sparks coming off your chain bar.

ego 56v chainsaw
Slowly add bar and chain oil. The tank holds 5 ounces.
ego 56v chainsaw
A little window lets you spy on your oil…

Note: the EGO manual says it’s normal for a little oil to seep from the saw while it’s just sitting around. I discovered this for myself, when there was a small puddle (the equivalent of a few drops) under the saw a day after using it. Luckily, the saw was sitting on my daughter’s washing machine, which made it pretty easy to clean up. Had it been on the back seat of my truck, I would likely have used some language unsuitable for the cultured readers we cater to. Lesson? When you’re finished using the saw, make sure it’s stored somewhere that a little oil leakage won’t be a problem, or drain the oil reservoir.

The EGO 56V Chainsaw Makes Some Wood Chips

The manual that comes with the saw is pretty well done. There’s a lot of safety information, as you would expect. The EGO 56V chainsaw may be battery operated, but don’t let that make you complacent. This is a serious tool, and when that chain is spinning it can do some serious damage. According to this recent article from Forbes, being a lumberjack is the most dangerous occupation in the U.S. If you’ve never used a chainsaw before, or you use one infrequently, it’s an excellent idea to give the safety info a look. They also provide some good tips and techniques to help you avoid kickback, and to make the most efficient use of the saw.

The first project for the EGO 56V chainsaw was to trim some limbs and wild growth from a tree at the edge of their property. One of the limbs was a few feet long, and nine inches in diameter at its largest point. There were several other branches that needed to come down, many of which were tangled in a huge vine. Good times! I shoved the battery into place, and prepared to do battle.

ego 56v chainsaw
Let’s slap the battery in and get going!

When I use my gas-fired chainsaws, I always use hearing protection. They’re LOUD, and I’d like to keep what’s left of my hearing. Even though the manual recommends ear protection, I didn’t feel it was necessary. The EGO is very quiet, nothing near the sound of a two-stroke engine. I didn’t miss the two-stroke fumes, either! I started out with the 9” limb. The EGO went through it easily, no bogging down or hesitation. I followed up with the remaining limbs, and a small offshoot that was growing just outside the fence. The saw powered through all of it with no trouble.

ego 56v chainsaw
The EGO 56V chainsaw ripping through the 9″ limb
ego 56v chainsaw
On to the next!

Next up was a peach tree that had contracted some kind of fungus. About half the limbs were dead, and although the trunk was all solid wood, there was some kind of fungus on the bark. The trunk at the base was also nine inches in diameter, and the tree was probably 16’ or so tall. I started out by pruning off the limbs I could easily reach, then made a notch cut and felled the tree. Once it was down, I trimmed off all the remaining branches, and bucked it up, cutting anything big enough for firewood into suitable lengths. The remainder of the limbs and brush I cut into 4-6’ lengths, and bundled it all up for the local yard waste recycling truck to pick up.

ego 56v chainsaw
The peach tree, unfortunately diseased…
ego 56v chainsaw
After removing the lower limbs, I cut the mighty peach tree down
ego 56v chainsaw
Down – now for the slice ‘n’ dice!

While we were at it, my daughter asked me to thin out a bunch of saplings that had grown wild on the opposite side of the yard. There were several, ranging in diameter up to 2-3” or so. I cut them out, and we cut up and bundled the remains. After finishing that, we headed back to the first tree, and cut those pieces into firewood or bundle-sized lengths. After that, a little raking, and the job was done!

ego 56v chainsaw
We cut the bigger stuff up for firewood…
ego 56v chainsaw
And bundled the small stuff up for the yard waste guys

Does The Ego 56V Chainsaw Live Up To Its Motto?

You gotta hand it to the folks at EGO. First off, to name the company EGO, and then to come up with the slogan “Power Beyond Belief!”. The excessively modest need not apply, I assume…that being said, I was very impressed with the performance of the EGO 56V chainsaw. The Ego got through everything but the final cut on one charge of the 2.0 Ah battery. I threw the battery on the charger, and in just under 30 minutes it was fully charged and ready to finish the job.

ego 56v chainsaw
Modest? Nope!
ego 56v chainsaw
All but the final cut on one battery charge

The saw is nicely balanced, comfortable to hold and use, and has a LOT more power than I expected it to. This is undoubtedly due in large part to the use of brushless technology for the motor, along with that big honkin’ battery! The saw was very quiet, and it was quick and easy to adjust chain tension. I had no issues with the chain loosening, just normal minor adjustments due to stretching, and the quality of the bar and chain is very good.

Are you going to take this saw to the northern forests and cut down mighty oaks all day? Nope. But if you’re a homeowner with trees and bushes to maintain, the EGO 56V Cordless Chainsaw should be capable of handling any cutting and trimming tasks you’re likely to take on. The folks at EGO back their slogan with a five year limited warranty. The EGO 56V Chainsaw is available from Home Depot with the 2.0 Ah battery and charger for $299; you can also get the bare tool for $199.

Buy Now - Kit via Home Depot


Buy Now - Bare tool via Home Depot

ego 56v chainsaw

Photo of author

About Phil

Phil’s path to the pinnacle of success as HomeFixated’s Senior Writer was long and twisted. At various stages of his life, he worked as a framing carpenter, attended motorcycle mechanics school, served as an Army MP, did a hot and itchy stint installing insulation in Phoenix, owned and operated a small contracting firm doing residential renovations, and worked as an employee of a major airline (Motto: We’re not happy ‘til YOU’RE not happy). He is currently semi-retired, but continues to take on little projects, such as the total renovation of an old farmhouse. Yes, he is a slow learner. Future projects include a teardown restoration of his 1965 BMW motorcycle, and designing and building a kick-ass playhouse for his grandsons. Phil loves spending time outdoors, hanging out with family and friends, cool tools, and a cold IPA when beer o'clock rolls around.

Subscribe to our newsletter

Get access to free prizes, product sneak-peeks, reviews, how-to's and much more!

More Info | Email Privacy

6 thoughts on “Ego Cordless Chainsaw – Be A Gas-Free Lumberjack”

  1. Liking the detailed review and photos. I realise its a few years on, but how are you finding felling and bucking with no dogs/spikes? Do the plastic ridges on the front do the job ok, or do you start slipping when pushing the saw a bit harder? Do you think there’s a way to attach some bespoke dogs/spikes to the saw without drilling through the oil reservoir?

    Has the saw held up well over the last few years?

    Reply
    • Hi, Tom – There are times when it would be handy to have spikes to give a little better purchase on whatever’s being cut. Given the fact that this saw is intended primarily for moderate duty homeowner use, though, it doesn’t often get pushed real hard.

      Having said that, this is the saw I keep at home, and grab whenever there’s a 6″ or so diameter tree to fell and buck up, and for all my limbing. When I have anything much bigger to deal with, or a lot of trees to take care of, I still grab the Echo or Husqvarna gas saw.

      As for attaching some bespoke dogs or spikes, given the fact that the body of the saw in that area is mostly plastic, I think it would be tough to attach anything that would hold up over time. The plastic ridges do help a little, and since the jobs I use the EGO for are generally finished in a couple of hours or less, it’s not a big deal. The saw has held up well to date, no issues at all, and it’s very handy to be able to just slap a battery on, dump in some chain lube, and go. Thanks for your comments!

      Reply
  2. I just purchased the saw a couple days ago. I assembled it, charged the battery, and was impressed how quickly I cut through several 8″-12″ ash logs. But today I took it out to use and it wouldn’t start! I pushed the safety tab and pulled the trigger just like yesterday, but no response! I was putting it away in the garage and tried one last time…it started! It then ran perfectly for me for about 30 minutes of cutting, it still had battery power left when I put it away. I’m still a little concerned though that it may have a faulty switch. I planned to buy one for my Dad for Christmas, but first I need to understand if there is a problem.

    Reply
    • You might try the Customer Support section on the EGO website, https://community.egopowerplus.com/ego Since you just bought the saw, I’d try taking it out every day and see if the problem repeats; there’s a 30-day return policy, so if you got one with a bad switch, you can return it and get another. I didn’t see any other mentions of that problem in their forum. If it happens again further down the road, the five year warranty will at least get it repaired for you.

      Reply
  3. Note: I just got an email last night from an EGO rep, stating that on the next round of shipments they will begin including bar and chain oil with the saw. I’m not sure when that will take effect; if you’re buying the saw, make sure to get some if it’s not included.

    Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.